Doorking 9050 Sliding Opener Light Commercial Heavy Residential Operator

DKS 9050 and DKS 9070 are designed to operate vehicular slide gates in residential and light-duty commercial applications only. DKS 9050 or 9070 are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, they can be pad or post mounted to meet any installation requirements.

• Doorking Slide Gate Operators - Doorking 9070
• Maximum gate length 22-feet.
• Maximum gate weight 500 pounds

• Doorking 9070 Gate Opener / Operator
• Maximum gate length 22-feet.
• Maximum gate weight 500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
• 1/2 HP continuous-duty motor.
• 115 VAC, 5.4 Amps.
• Operator is shipped with chain brackets and 20-feet of #41 chain.
• Class I and Class II applications.
• Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
• Dimensions: 12"W x 24"H x 11.5"D

• Doorking 9050 or Doorking 9070 Gate Openers
• OPTIONS AVAILABLE WITH THIS OPERATOR
• DC powered convenience open.
• Nickel plated chain.
• Stainless steel chain.
• Plug-in loop detectors.
• Heater kit for cold environments.
• Surge suppressors.