Shopping Cart

0 item(s) in cart/ total: $0    view cart
Doorking 6300-081 Master Slave 1/2 HP Operator Residential Swing Gate Opener
Doorking 6300-081 Master Slave 1/2 HP Operator Residential Swing Gate Opener

Doorking 6300-081 Master Slave 1/2 HP Operator Residential Swing Gate Opener

Call For Price
Part Number:6300-081 Master Slave

Choose Options

Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.
PhotoCell

Doorking 6300-081 Master Slave 1/2 HP Operator Residential Swing Gate Opener

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. POST OR PAD MOUNT - NOT INCLUDED. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. Can be equipped with a factory installed DC Convenience NOT INCLUDED THIS IS A SLAVE UNIT NO CONTROL BOARD IS INCLUDED use with 6300-080-(088)-(092)

    ADVANCED FEATURES

  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open (optional).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.
  • SPECIFICATIONS

  • Model 6300 with 1/2 HP Motor
  • Maximum gate width 18-feet.
  • Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • 1/2 HP continuous-duty motor.
  • 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
  • Class I, II, III and IV applications.
  • Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)
  • OPTIONS AVAILABLE WITH THIS OPERATOR

  • Master / slave connection cable (slave operator is shipped with 50-feet of cable).
  • Post or pad mount - specify which.
  • DC powered convenience open.
  • Plug-in loop detectors.
  • Heater kit for cold environments.
  • Surge suppressors.

Related Items